Evolis Zenius User's Guide download pdf (Page 10)

Removing printed cards

Once the print cycle is complete, cards are delivered into the output hopper below the card feeder. This output hopper is designed to

collect the printed and/or encoded cards. The printer is equipped with an output hopper with a maximum capacity of 20 x 0.76 mm

cards.

Adjusting card thickness

The printer is equipped with a manual card thickness adjustment mechanism which can be reached through the inside of the printing unit

when the cover is open. The printer accepts card s varying in thickness from 0.25 mm to 0.76 mm. The factory setting is 0.76 mm.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 62 63

No comments

Evolis Zenius User's Guide Page 10