Evolis Tattoo User's Guide download pdf (Page 20)

2. Cleaning of the print head

WARNING !

The print head is a fragile component of your printer. To avoid

damaging it, never put the print head in contact with pointed

and/or metal objects. Also avoid touching the print head surface

with the fingers. Changed print quality or even permanent

degradation of the print head could result.

WARNING !

After a cleaning cycle, wait 2 minutes for the cleaning fluid to

evaporate completely before using the printer.

The print head is cleaned during the automatic cleaning of your printer (see previous section).

However, in order to preserve the original print quality and to reduce problems caused by an excess

of ink on the print head surface, it is recommended that you clean it regularly (about every

500 cards) using the swab supplied with your printer.

To carry out print head cleaning :

1. Open the printer cover and locate the print head.

2. Take the swab from the Cleaning Case supplied with your printer.

3. Gently rub the swab from left to right on the

print head for a few seconds.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 32 33

No comments

Evolis Tattoo User's Guide Page 20